Formation of a Steel Rope Set
Time Dilation in Steel Rope Set
While studying a 6x26 steel rope, Warrington-Seale notices that its behavior as a phenomenon is no different from that of an incandescent lamp.
Steel rope - Light from lamp
By hand touchable - Not by hand touchable
____________________________________________________
Dimensionalities
Length - Area - Volume - Time
Speed of light is area c2
Why did I chose this time steel rope, due to the fact that I finished the previous writing to visual geometry patterns. The square and the circle area ratio are defined by time dilation and the the area of the unit circle is the specific gravity of steel. Calculation throug figures would not be possible without this connection.
1 / (1.25 x 1.03) = 0.78
Incandescent Light Bulb
 We get the energy from the Sun. We cannot look at the Sun, so we need to create a small-scale space. To this we take the light bulb in the image. An electric light inside the lamp is produced with a filament wire heated to a high temperature by an electric current through it, until it glows.
Most incandescent bulbs convert 3 - 5% of the energy they use into visible light, then the light is friction of the heating process.
100 / 1.0328 = 96.82 %
Universal friction 1.0328 (time dilation 0.25 c)
Steel - Wikipedia
 Steel is an alloy of iron and carbon that is widely used in construction and other applications because of its hardness and tensile strength. Carbon, other elements, and inclusions within iron act as hardening agents that prevent the movement of dislocations that naturally exist in the iron atom crystal lattices. The carbon in typical steel alloys may contribute up to 2.1% of its weight. Varying the amount of alloying elements, their formation in the steel either as solute elements, or as precipitated phases, retards the movement of those dislocations that make iron so ductile and weak, and thus controls qualities such as the hardness, ductility, and tensile strength of the resulting steel. Steel's strength compared to pure iron is only possible at the expense of ductility, of which iron has an excess.
Steel Wire
The steel rope is intended for supporting. The analysis shows a range of the steel rope formed the same way as in the previous example. Steel Rope values are in the revised tables.
Diameter Weight
D mm kg/100 m
10 38.0
12 54.7 54,7/38,0 = 1.779
16 97.3 97,3/54,7 = 1.772
20 152.0 152/97,3 = 1.562
24 219.0 219/152 = 1.441
32 389.0 389/219 = 1.777
40 608.0 608/389 = 1.562
Keskiarvo/Average 1.649
1.618 x 1.0165 = 1.645
1 + (0.033/2) = 1.0165
10 - 12,5 - 16 - 20 - 25 - 32 - 40
The rule in the two-dimensionality of the universe; twice as far to be four times larger. Status value = 10 => 16 is two times higher.
4 x 38 kg/100 m = 152 kg/100 m
16 x 38 kg/100 m = 608 kg/100 m
6x26 Warrington -Seale (the breaking strength of the yarn 15.7 kN/cm2)
Tabled Data
D mm kN/cm2
10 55.9
12 80.6 8,06./5.59 = 1.442
16 143.0 143/80.6 = 1.774
20 224,0 224/143 = 1.567
24 322.0 322/224 = 1.438
32 573.0 573/322 = 1.780
40 895.0 895/573 = 1.562
Yhteensä = 1.593
1.618 / 1.0165 = 1.591
1 + (0.033/2) =1.0165
Minimum breaking load is to be attained or surpassed during the tensile-test. (967)
4 x 55.9 = 223.6 kN/cm2
16 x 55.9 kN/cm2 = 894.4 kN/cm2
(1.649 + 1.593) /2 = 1.62 = Golden Ratio 1.618
1.033 x 1.593 = 1.645
Home Page
29.3.2015*21:20 (967 - 709)
www.karikolehmainen.com
epcalculation@gmail.com |
