Base Slabs to Machine Installations
The base slabs are used for machine installations. Usually a device is mounted onto the base slabs by welding. The base slabs are embedded onto the concrete. The image shows clearly anchor bars below the surface of the plate. All products in the image have the same construction, a design is variable. These simple products are a good practice for the calculation, such as the image represent the product.
The weight of the product can be calculated by knowing the size and thickness of the plate, diameter of round bars, and their lengths. One product calculation is made easy. What if it has to determine all sizes of weight? Does we design all products for the calculation? Product catalogs often provide a little technical information about the product. With the help of the Equivalent Proportional Calculation, a minimum data of the product, give us a possibility to create a reliable picture of the product.
The products form an exponenetial curve of their values. Value to an another product, it is possible to determine by knowing the other. The base slabs calculation is a simple task, which should be familiar with plate thickness and change of the plate size. By looking the image, the above-written feel comfortable.
14.5.2012*12:56 (43926 - 67)
www.karikolehmainen.com
epcalculation@gmail.com
|
