Wheel Blocks Lifetime

Pyöräpesät käyttöikä

The image includes a wheel block upside down.

1. Wheel Unit

An open gear transmission is suitable for light constructions, especially when soft starter unit. The manufacture of wheel such as of S355 steel, there is the possibility to material surface hardening. The cost is about 10 € per kg. There is also other opportunities to solve the wear resistance. The increased teeth width, gives also mor lifetime. This because the wear is relative to the contact pressure on the teeth. Thus we come to the speed in which the 25% reduction in the acceleration doubles the lifetime.

One dimensional coefficient 1.25 represents a doubling of the phenomena distance. The same applies to manufactured devices. This, however, seem to forget in the name of the efficiency. There are also heavy fans, which increase the device life.

2. Visual Geometry

circle_6.28.jpg

/ 5 = 1.25

3. Physics

E = m c²

Momentum p is transformed into Lorenz - variant factor 1/L when L = sqrt (1-( v/c )²)

==> time dilation 1.0328 when the speed of light 0,25 c

1d x 2d x time dilation = 1.618
1.25 x 1.25 x 1.0328 = 1.618

1d x 2d x 3d x time dilation = 2
1.25 x 1.25 x 1.25 x 1.0328 = 2

Coefficient 1,25 joins almost to all calculated phenomena

1.0328⁷ = 1.25